03-07-2022 03:28 PM
Hello.Just purchased a new Dell tower and am bummed that my trusty imageCLASS D420 will not work with windows 11(at least i don`t think as i cannot find an 11 driver.Much obliged if anyone knows a way i can get them to communicate.BIG thanx!
Solved! Go to Solution.
03-17-2022 03:12 PM
To use the D420 with a Windows 11 computer, you can download the Windows 10 drivers and software using the link found HERE. The drivers will work with your Windows 11 computer.
03-17-2022 11:35 AM
I'm running into the same issue. HP has the new drivers posted on their website - why doesn't Canon?
03-17-2022 03:12 PM
To use the D420 with a Windows 11 computer, you can download the Windows 10 drivers and software using the link found HERE. The drivers will work with your Windows 11 computer.
03-17-2022 06:48 PM
Hi Hector - thanks for the reply. I am able now to connect to the printer with a USB cable, but through my wired network. Is there a factory reset procedure so I can reset all of the network features?
03-19-2022 09:30 AM
YESSSS Hector.i figured that out last week.works like a charm.THKU soooo much for reply man!
04-01-2022 07:45 PM
This did NOT work for me.
04-14-2022 10:30 AM
Windows 10 drivers do not work for me on a Windows 11 HP Pavilion, installing as a local printer. Printer installs but does not print test page, nor a Word document. Document just stays in print queue.
04-14-2022 03:37 PM
Addition by JustDon: My problem has been solved. Here is what I think I did wrong. First, I had the printer plugged in to the PC and turned on when I ran setup.exe to install the drivers. Second, I tried to install it in LPT1, the parallel port when it needs a USB port. With the drivers improperly installed, there was no choice of a USB port. Properly installed, a port named USB001 was added to the port list. An aside: I read that some older printers can't run on the new high speed USB ports, but after I installed it in a USB 2.0 port, I moved it to a "super speed" usb port and it worked fine. So yes, the ImageClass D420 can be installed on a Windows 11 PC (mine is a HP Pavillion) using the Windows 10 drivers, as Hector said, but if you don't install them correctly, you may mistakenly conclude it won't work.
04-01-2022 07:43 PM
I tried that link several times. Installing, uninstalling, shutting down the computer restarting, etc. The windows 10 version did not work on my new Windows 10 HP All In One computer.
04-01-2022 07:44 PM
Sorry, I mean Windows 11 computer.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 1.1.0.0
PowerShot SX420 IS - Version 1.1.0.0
PowerShot 620 HS - Version 1.1.0.0
PowerShot SX720 HS - Version 1.1.0.0
PowerShot G1X Mark III - Version 1.1.0.0
PowerShot G7X Mark II - Version 1.2.0.0
PowerShot G9X Mark II - Version 1.1.0.0
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!
EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STMCanon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.