I just purchased an imageCLASS MF743Cdw printer. When I try and go back to the previous menu item by pressing the back icon in the upper left corner of the screen, it selects the first item on the menu below the back icon. It seems that the screen needs to be calibrated. Is there a way to do that?
I had the same. If you go into service menu you can recalibrate it. There are a couple of hidden buttons either side of the home button. So procedure is:
Press "Button" 1 (left of Home)
Press "Button" 2 (right of Home)
Press sound button on left of panel
Press bottom right hand "button" on screen (can't remember what it's called!)
That should put you in Service Mode - but may take a few attempts. There's better visual instructions on the web 🙂
Once in it's Copier>Adjust>Panel>Touchchk, press on the dots, and it recalibrates the touch side of it.
07/31/2023: New firmware updates are available.
05/31/2023: New firmware updates are available.
05/18/2023: New firmware updates are available.
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM