04-13-2016 01:33 PM
I have a Colorwave 650 receiving Error 450012. The only other information on the screen is telling me to press re-boot, or to power off and power back on using the power button. This error code is not listed in the manual and there is nothing online about this specific code.
Does anyone have any information about this code? The printer was working fine yesterday, no changes have been made to the hardware/software, and I have verified that the paper has been loaded properly.
04-13-2016 01:58 PM
Hi awoitte!
Thanks for posting!
While our Forum Community members are welcome to chime in, for support on CSA or Oce machines, you'll want to contact Canon Solutions America.
Canon Solutions America Support can be reached at the following link: http://bit.ly/CSASupport
We hope this helps!
03-18-2018 07:23 AM
06-05-2020 09:09 AM
06-05-2020 09:19 AM
06-11-2020 08:14 AM
06-11-2020 08:26 AM
06-11-2020 08:05 PM
thank you for all your input.. very helpful.
the head is second hand and i will do a straight swap and let you know the outcome.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.