09-27-2021 03:22 PM - last edited on 09-28-2021 10:15 AM by Danny
HI - My MF269dw printer simply will not collate either 1 sided or 2 sided print jobs. I don't understand why. Could I have some embedded setting incorrect?
Any help is enormously appreciated.
Eliot
12-20-2021 03:08 PM
Hello Etow,
We would be happy to assist with the issue. To provide some feedback or some troubleshooting steps, we would need some additional information. If you could reply to this message with the information below, we can provide some assistance.
11-07-2022 06:16 PM
HI Hector - I know this is a long time between your post and my response. I hope you are still there.
Thanks much for any suggestions. Eliot
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.