09-06-2021 02:11 AM
I have trouble keeping a good connection on Air Print. I'm on a Mac and the printer usually does not connect easily. Then I reinstall driver and I always have a hard time finding it. Now there is a connection tool but that doesn't make it easier.
How can I get the printer and the Mac to find each other?
10-29-2021 05:50 PM
Hello Rockulius,
The airprint driver built into the Mac OS is not the driver that I would suggest using when connecting the printer. When adding the printer, it should use our UFR printer driver. To help with the connection, I would suggest trying to add the printer again. Before clicking add in the add printer window, check the USE drop down box to make sure the printer driver is selected instead of airprint.
If the driver is not available, I would suggest downloading and installing the UFR printer driver using the link HERE.
We would be happy to assist with the issue. To provide some feedback or some troubleshooting steps, we would need some additional information. If you could reply to this message with the information below, we can provide some assistance.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.