08-19-2022 11:18 AM
MF642Cdw says its not connected to computer. It is. Will not recognize usb. Will not scan to computer. I have uninstalled and installed several times. Still getting the same errors. I keep Windows updated.
Processor 11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz 2.70 GHz
Installed RAM 16.0 GB (15.6 GB usable)
System type 64-bit operating system, x64-based processor
Edition Windows 11 Home
Installed on 12/23/2021
OS build 22000.856
Experience Windows Feature Experience Pack 1000.22000.856.0
Please advise and have a great day.
08-19-2022 12:02 PM
A few questions to get the ball rolling:
If there are any other computers available, could the 642 be connected to one of them to see if it can communicate with it?
Is it possible that the cable itself may be bad?
The 642 can be networked via Wi-FI or an Ethernet cable. If, for some reason the printer will not work when direct connected to the computer, would any of these other options be doable?
08-19-2022 05:12 PM
Dexman335 thank you for the reply.
The 642 communicastes with my laptop.
The 642 is connected via usb cable to my laptop and will print.
The 642 will not scan to my computer. The 642 screen says there is no computer connected.
The 642 will not scan to a usb flash. The 642 screen reads there is no usb conncetion.
08-19-2022 07:33 PM
Let me focus on the last symptom. If my memory is correct, the USB drive should be 32GB or less. I can't recall how the drive should be configured....FAT32 possibly? 🤔
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 18.104.22.168
PowerShot SX420 IS - Version 22.214.171.124
PowerShot 620 HS - Version 126.96.36.199
PowerShot SX720 HS - Version 188.8.131.52
PowerShot G1X Mark III - Version 184.108.40.206
PowerShot G7X Mark II - Version 220.127.116.11
PowerShot G9X Mark II - Version 18.104.22.168
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.