03-05-2021 07:43 PM
Trying to print to a new Canon LBP623 through a LAN. Running Windows 10. The printer says it is connected to the network, and the computer found the printer on the network, no problem. Newest drivers installed. But when I try to print a test page from Settings - or when I try to print anything else to the printer, I get an error message that simply says, "The printer couldn't print XX."
I can open the queue and cancel the job, and it goes away - but the same thing happens if I try to print again.
I've rebooted and powered off/on both computer and printer.
If I print a test page from the printer itself, it prints fine - ink, paper, etc. all working find. But I can't print anything across the network.
Any help appreciated.
05-04-2021 02:43 PM
If you are having problems printing over the network, but can perform prints from the printer itself, it looks like there is a problem with the network communication or something is blocking the print jobs. In this situation, I would suggest starting by uninstalling the drivers from the computer.
Once the driver has been uninstalled, you can disable any security software that can prevent communication and then you can reinstall the printer driver. You can download and install the UFR II printer driver using the link provided HERE.
Once the drivers have been reinstalled, you can try another print to see if it works. If it does, you can try turning on your security software to see if it still prints. If you continue to have issues printing over the network, you can also try unplugging the router from the power for 5 seconds and then plugging the router back in. Once the network is back up, you can try printing again to see if it works.
If you continue to have issues printing, feel free to contact support at 1-800-652-2666, our agents would be happy to help.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 22.214.171.124
PowerShot SX420 IS - Version 126.96.36.199
PowerShot 620 HS - Version 188.8.131.52
PowerShot SX720 HS - Version 184.108.40.206
PowerShot G1X Mark III - Version 220.127.116.11
PowerShot G7X Mark II - Version 18.104.22.168
PowerShot G9X Mark II - Version 22.214.171.124
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.