06-04-2021 04:27 AM
My 6230dn print fine with 1 side for all documents but when use the 2 sides setting, firt page go fine out side then machine so jam. Ive checked all part but nothing inside machine jam.
Can you help me, may be a sensor error >?
07-13-2021 04:19 PM
Hello Anhseo9m,
If the paper jams whenever you try a duplex print, it will usually point to an obstruction in the paper feed path or a problem with the paper feed rollers. To make sure the paper feed path is clear, make sure to open the rear cover and check the full paper feed path using the steps in the link provided HERE.
If the path is clear, it would mean the printer needs service. You can contact our support team at 1-800-652-2666, our agents would be happy to assist and can provide your service options.
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.