09-25-2016 01:54 PM
11-01-2016 05:07 PM - edited 11-01-2016 05:09 PM
Hi cnr.
I will be able to assist you.
Sometimes an interference, such as low power voltage, can cause the machine to operate incorrectly. If the printer is currently plugged into a surge protector, please power it off, and then unplug it. Next, plug the machine directly into a wall outlet on an opposite wall. If the copy speed still appears to be slower than normal, it is recommended that you contact us at 1-844-4-MAXIFY (1-844-462-9439).
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.