Showing results for 
Show  only  | Search instead for 
Did you mean: 

I cannot load windows 10 driver on new machine for a LBP7100Cw printer.


HI -- I jsut tried to load the drivers for a CAnnon LBP7100Cw, and it will not recognize it.  the machine is a Dell Inspiron13 7000 series.  I had the same issue with my Surface Pro 4 machine too.  both are running windows 10.  does this printer not support windows 10?




Hi jwmeyer68.


I will be able to assist you.


The MF7110Cw is supported with the Windows 10 operating system.  The file that you download from the Canon website is a .ZIP file. When you select [RUN], it unpacks the setup folder. Please follow the instructions below to install the printer:

*  If installing the printer with a network connection, you will need to double-click on [Network Setting Tool] > [64bit], and then run the CNAN1STD file to connect the printer to the network.

1. Open your [Downloads] (or [Documents]) folder.

2. You will see two icons with the name: LBP7110Cw_V2063_W64_us_EN_1. Double-click on the yellow folder icon with this name.

3. Double-click on DRIVER to open the folder.

4. In the folder you will see two listings for Setup. Double-click on the Setup that has the type as [Application].

5. The "MF Drivers Setup Wizard" will open. Proceed through the steps and restart the computer.

6. After restarting the computer, connect the USB cable and allow the installation to complete.

7.  Print a document.


Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
08/18/2023: Canon EOS R5 C training series is released.

07/31/2023: New firmware updates are available.

CR-N700 - Version 1.2.0

CR-N500 - Version 1.3.0

CR-N300 - Version 1.3.0

CR-X300 - Version 1.1.0

06/30/2023: New firmware version is available for EOS-R5 C

05/31/2023: New firmware updates are available.

EOS R6 Mark II - Version 1.1.2

EOS R6 - Version 1.8.2

EOS R7 - Version 1.3.1

05/18/2023: New firmware updates are available.

EOS Rebel T100 - Version 1.1.0

EOS Rebel T7 - Version 1.2.0

EOS 5D Mark IV - Version 1.4.0

EOS 6D Mark II - Version 1.2.0

PowerShot Elph 360HS - Version

PowerShot SX420 IS - Version

PowerShot 620 HS - Version

PowerShot SX720 HS - Version

PowerShot G1X Mark III - Version

PowerShot G7X Mark II - Version

PowerShot G9X Mark II - Version


04/20/2023: New firmware version 1.4.1 is available for EOS R3

03/30/2023: New firmware updates are available.

EOS R5 - Version 1.8.1

EOS 1DX Mark III- Version 1.7.1

Speedlite EL-1 - Version 1.0.2

03/30/2023: Product Advisory for EF50 F1.2 L USM

03/30/2023: Product Advisory for EOS R10

02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5