Canon Community Canon Community
 


Reply
New Contributor
Posts: 4
Registered: ‎05-16-2018

Error message 255,0,0 when trying to scan

When I try to use the scanner on the printer, I get this error message:

 

"Error in scanner.

Follow instructions in the online manual.

Scanner driver will be terminated.

Code: 255,0,0 "

 

Both scanning and printing were working fine, but I have since moved offices and onto a new network.  On the new network, I changed the IP address of the printer settings and printing works.  Scanning gives the above error.  I uninstalled the MF Scan Utiility, downloaded the latest version of the MF Scan Utility, and tried again, but got the same error.

 

I'm using Windows 10 Pro.

 

I haven't reinstalled the printer driver.

 

What should I do next?

Super Contributor
Posts: 229
Registered: ‎11-17-2014

Re: Error message 255,0,0 when trying to scan

Hello kQuimbly!

Welcome to the Canon Forums and thanks for your post!

To have a better understanding of your issue, please let everyone know what product you are using. That way, the community will be able to assist you with suggestions appropriate for your product.

Any other details you'd like to give will only help the Community better understand your issue!

If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at usa.canon.com/support or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).

Thanks!

New Contributor
Posts: 4
Registered: ‎05-16-2018

Re: Error message 255,0,0 when trying to scan

MF634cdw
New Contributor
Posts: 4
Registered: ‎05-16-2018

Re: Error message 255,0,0 when trying to scan

Model: MF634cdw
Respected Contributor
Posts: 1,119
Registered: ‎02-06-2013

Re: Error message 255,0,0 when trying to scan

There's an existing thread that may help.  Check this out:

 

http://www.community.usa.canon.com/t5/Office-Printers/MF-4890dw-Not-scanning/td-p/53835

================================================
Diverhank's photos on Flickr
New Contributor
Posts: 4
Registered: ‎05-16-2018

Re: Error message 255,0,0 when trying to scan

After installing the main driver and MF scan utility and then reinstalling both, the error went away.
New Contributor
Posts: 4
Registered: ‎01-03-2016

Re: Error message 255,0,0 when trying to scan

Here's a fix a got from a forum relating to the MF Toolbox.  It worked for the MF Scanner as well.  Best tip I've ever gotten on a forum.  It follows exactly as I received it:

 

08-19-2015 10:36 PM

This simple fix I found online worked for me:

 


Start> in the run box type. Services.msc

Scroll down to Windows Image Acquisition (WIA)

Right click, select Properties

Check that Startup type is set to Automatic

Click Log On Tab

Check that Local System account , and Allow service to interact with desktop is checked. Hit apply.

Click Recovery...Click on window next to First Failure, Scroll to Restart the Service. Hit apply.

Occasional Contributor
Posts: 7
Registered: ‎08-25-2019

Re: Error message 255,0,0 when trying to scan

"Click Log On Tab

Check that Local System account , and Allow service to interact with desktop is checked. Hit apply.

Click Recovery...Click on window next to First Failure, Scroll to Restart the Service. Hit apply."

 

What OS are you running?  I don't see that option under services.msc for windows 7.

New Contributor
Posts: 4
Registered: ‎01-03-2016

Re: Error message 255,0,0 when trying to scan

I've been using Windows 10 pretty much since Microsoft first rolled it out and I think the Windows 10 installation initially created this problem back in 2015.  Everytime I got an update for a long time, the update would reset the Windows Image Acquisition settings.  So the specific steps in this solution may be particular to Windows 10 but I think checking and fixing the WIA settings should work in Windows 7.  Here is something I found that applies specifically to Windows 7; I don't know if it will work but it seems similar to the one I used for 10:

 

Follow these steps:

a.       Click on Start, in Search box type “services” without quotes.

b.      Click on the service which is present at the top of the program list.

c.       Scroll down to Windows Image Acquisition (WIA).

d.      Double click on it and click the Dependencies tab

e.      Make sure, all services Windows Image Acquisition depends on, are running

f.        Switch to "Recovery" tab, and change all 3 drop-down boxes to "Restart the Service".

g.       Make sure the 2 Reset boxes underneath say "1" in them.

h.      Click Ok.

Occasional Contributor
Posts: 7
Registered: ‎08-25-2019

Re: Error message 255,0,0 when trying to scan

Thanks buddy for the response.   This is what I was able to find with some digging that worked.  Basically, I had to uninstall everything. Run a utility to make sure all registry settings are wiped, and then reinstall the printer driver from c:\.  Then reinstall the scan driver.

 

https://community.usa.canon.com/t5/Office-Printers/Could-not-install-the-printer-driver-Try-to-insta...

 

Hopefully, this will not happen again but I know it will.  About half the time I use this MFC I have problems connecting to it.  Going to try your solution next time  

 

 

powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement