08-28-2018 08:41 AM - edited 08-28-2018 02:53 PM
My Canon D420 was just fine few days ago. Yesterday it just turned on and no function is working i tried printing and copying. Can’t figure out what the problem could be.
Any help would be greatly appreciated. Thanks
08-28-2018 12:10 PM
The unit may just need to be reset in order to resolve this issue. Please unplug the power to the unit for a few minutes then plug it back in and power back on the machine. Additionally, try plugging the unit directly into the wall outlet as opposed to a surge protector or power strip.
If you continue to have difficulties, please contact our support group using the following link:
08-28-2018 01:10 PM
Thanks James_C for quick reply. I did as you directed but still not able to print or copy. I was able to scan this time. Not sure where the problem is. I have connected it directly to the power outlet but can't print or copy.
I hear the printer setting up as I switch it On but after that my print commands just come into queue and dissapear. The printer status says Idle. I would appreciate if you can help me on this one.
08-28-2018 02:21 PM - edited 08-28-2018 02:53 PM
Hi, spoke to the support but not able to solve it yet. As scanning is working they think could be roller or feeder. Will need to take it to service center which I think is not worth it.
If anyone has any other solution let me know, I did clean the roller too.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 22.214.171.124
PowerShot SX420 IS - Version 126.96.36.199
PowerShot 620 HS - Version 188.8.131.52
PowerShot SX720 HS - Version 184.108.40.206
PowerShot G1X Mark III - Version 220.127.116.11
PowerShot G7X Mark II - Version 18.104.22.168
PowerShot G9X Mark II - Version 22.214.171.124
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.