Canon Community Canon Community
 


Reply
Highlighted
New Contributor
Posts: 4
Registered: ‎08-16-2020
Accepted Solution

Focus ring on 18mm-55mm loose

 I recently invested i getting a 18-55mm lens for my Canon EOS 70D. It was working fine until I tried putting on a fisheye/macro lens attachment; when i took the attachment off the focus ring on the 18-55mm lens was loose and now it will not focus Cat Sad

 

 Please tell me there is an easy way to fix this.

Highlighted
Reputable Contributor
Posts: 531
Registered: ‎10-21-2016

Re: Focus ring on 18mm-55mm loose

[ Edited ]

Check to make sure that you haven't moved the switch on the side to MF (manual focus).

 

And throw that fisheye/macro adaptor thing away they are useless things.

Highlighted
VIP
Posts: 13,026
Registered: ‎12-07-2012

Re: Focus ring on 18mm-55mm loose

Try this:

 

Take the lens off of your camera.

Put the lens in MF mode.

Twist the FOCUS ring (the tip of the lens) all the way to one side (extend it). You may hear a click noise or two, this is good, but don't FORCE the lens.

Twist the FOCUS ring all the way to the opposite side (retract it). Again, you may hear a couple of clicking noises. What we hope is happening is the focusing motor being put back into its proper place.

Put the lens back on the camera.

Put the lens in AF mode.

Turn the camera on.

Put the camera in AUTO or P mode.

Take a test photo.

Good luck

 

Never mount anything to the front of that lens again.  It is wrought with problems and a very little return. The add-on lens is junk so treat it as such. Deposit in the round file!

 

EOS 1DX and 1D Mk IV and several lenses!
powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement