Canon Community Canon Community
 


Reply
Occasional Contributor
Posts: 5
Registered: ‎10-06-2016

Re: MP Navigator EX will not open

I found an updated macOS 10.13 driver for my Lide 210. I loaded the driver but the MP Navigator EX still does not open. Any suggestions would be welcome.

Product Expert
Posts: 890
Registered: ‎11-19-2018

Re: MP Navigator EX will not open

[ Edited ]

Hi philkdc,

 

You can download the LIDE 210  ICA Driver Ver.4.1.4a  and LiDE 210 Scanner Driver Ver.17.7.1h for OS Mojave 10.14  by clicking HERE.

 

Once both drivers are downloaded and installed, please make sure the version of MP Navigator EX is Ver. 4.03. If it a older version, please click on the software tab next to the drivers tab and install the updated version of MP Navigator.

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Occasional Contributor
Posts: 5
Registered: ‎10-06-2016

Re: MP Navigator EX will not open

Thank you. My Canon Lide 210 is back in working order!

Highlighted
New Contributor
Posts: 2
Registered: ‎02-08-2019

Re: MP Navigator EX will not open

I have a canon Scan Lide 120 and I tried several different versions of MP navigator and none of them open.

 

I

New Contributor
Posts: 3
Registered: ‎04-23-2019

Re: MP Navigator EX will not open

I have a pixma mx 882, and running mojave 10.14.4 on a Mac.  I am able to print, but cannot get mp navigator to open  

 

Occasional Contributor
Posts: 5
Registered: ‎10-06-2016

Re: MP Navigator EX will not open

This is what Canon sent me and it worked for Mojave on my Mac -- 

You can download the LIDE 210  ICA Driver Ver.4.1.4a  and LiDE 210 Scanner Driver Ver.17.7.1h for OS Mojave 10.14  by clicking HERE.

 

Once both drivers are downloaded and installed, please make sure the version of MP Navigator EX is Ver. 4.03. If it a older version, please click on the software tab next to the drivers tab and install the updated version of MP Navigator.

New Contributor
Posts: 3
Registered: ‎04-23-2019

Re: MP Navigator EX will not open

Thanks. I will try that.
New Contributor
Posts: 3
Registered: ‎04-23-2019

Re: MP Navigator EX will not open

That did not work.  Still unable to scan

Canon, please help!

New Contributor
Posts: 2
Registered: ‎11-24-2018

Re: MP Navigator EX will not open

[ Edited ]

I found a solution that allows me to continue using my Canon Canoscan 9000F, but it costs.  It is called VueScan, and is sold by (Removed link as per Forum Guidelines).  The current cost is $40 for the "Standard Edition" and $90 for the "Professional Edition".  (You have to go thru a few pages to find out the price--so annoying when they do this.  /End rant.)  It's currently on sale for $10 less than what I paid.  I intend to use it for quite a while, including for film and slides, so I purchased the Professional Edition.  I've only done documents and photos so far, but it seems to be working fine.  (If you are dissatisfied, there's a free trial.)  It's supposed to work on 5600 scanner models.  I recommend it: much better than trashing my perfectly-good Canon scanner.

Frank

Product Expert
Posts: 178
Registered: ‎04-19-2019

Re: MP Navigator EX will not open

[ Edited ]

Hi martinigirl219,

 

For MP Navigator to return to functionality on your computer the old software will need to be completely removed from your computer. Just the MP Navigator software is what needs to be removed.

 

Ensure it is removed from the following locations: Canon Utilities Folder | Desktop | Dock (at the bottom of the screen) |

 

You may have to go Force Quit and Quit MP Navigator from that location as well. Once the program is removed empty the trash and restart your computer. 

 

After your computer has restarted you can trying using an older driver to work on your operating system. There is not a certainty that this will work.Click HERE to access the Canon website for the MX882. Once on the website locate Operating System and adjust it to the most recent OS with drivers available. You will want to download and install the following drivers/software from the appropriate tabs:

 

Drivers: MX880 series Scanner Driver Ver. 17.7.1b (Mac) & ICA Driver Ver. 4.0.0(Mac)

 

Software: MP Navigator EX Ver. 4.1.4 (Mac)

 

Once the software is installed, open the MP Navigator EX program and attempt to perform a scan.

powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement