cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Problem with new " P23-DH V" Calculator

anken32
Apprentice

Hi,

I'm glad to have found  this forum.

My problem is with my new Canon Calculator and  I haven't found anything on this subject.

I hope that someone can give me some help. 

Everything is working well with the P23-DH Calculator but I just can't figure out how to do an subtraction and come up with the right answer. 

This is probably way too basic to even address for most people but I just can't seem to do it.....

 

I have the decimals set to +(the choice is +/0/2/3/F) and I have tried all of them....Anyway, I can add, multiply and divide with this unit but when I  tap the red minus key to subtract a number  nothing happens and when I tap the equal key, the result is all wrong.

Can anybody tell me what I'm doing wrong?

I will appreciate any suggestions my might have. Thanks in advance, Ann

6 REPLIES 6

anken32
Apprentice

Hi, I just wanted to add.....Have done some searches online and found that maybe.....this calculator is the "RPN" type?  The box didn't indicate it....

I wonder if it is" RPN " if there is a way to switch over to the "algebraic" type.

 

Have had my little Canon handheld printing calculator for a number of years, loved it but it finally wore out. Now that I have a bigger desk, I went for the larger Canon and can't figure it out..... Very frustrating!  The manual doesn't make it clear to me....

I'm hoping that somebody has this type of calculator and can help.....

Just a quick update...

Problem solved.  Found that I had to tap the minus key AFTER entering the numbers. I sure feel silly....

Havent' had any problem with all of the other settings. On my  other Canon I had to tap the number first and then the minus key.

Anyway, I'm happy with this unit now.....

Glad you figured it out! Smiley Happy

 

How funny that the subtraction is RPN but the other functions work normally!  I'm sure there's probably a reason math/finance people want it this way, but I can't think of why. 

Thank you for writing, jfo. I appreciate it.

Hello, thank you for posting this question, and the answer!  I just got one and struggled just as you did.  Thanks to you, I can subtract now!    

tater
Apprentice

Mine will print a minus sigh but with not a number beside it. hit the equal button, total will be on the screen but it doesn't print or anything. what will make it all work?

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.