09-12-2013 09:04 PM
err 5o? What can I do?
09-15-2013 10:54 AM
Hi farrier!
Thanks for posting!
The error code you received indicates that there is an electrical control malfunction has been detected. Power the camera off, remove the lens, battery and CF card, then allow the camera to sit unpowered for 5-10 minutes. After this, please reinstall the battery and try taking a picture again. If the error still appears, your camera will need to be serviced.
To start the repair process, you'll need to complete a Repair Request on our website.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.