04-07-2014 01:49 AM - edited 04-07-2014 01:50 AM
The EP-EX15 II is slightly smaller so that it fits better on the smaller cameras.
B&H Photo sells both: EP-EX15 and EP-EX15 II (neither one will fit the 5D Mk III)
12-18-2016 11:46 AM - last edited on 01-18-2017 12:14 PM by Stephen
It has been a while but for those who own a 7D/Mark II, 5D Mark III/Mark IV, 1D X/Mark II and other 1D series, we're looking at 3D printing the eyecup extender since JJC and Goja no longer makes them. Here is the post
[Removed link per the FORUM GUIDELINES]
01-18-2017 12:03 PM - last edited on 01-18-2017 12:15 PM by Stephen
12-02-2018 09:44 PM
I couldn't find anywhere an eyepiece extender for my 5DIII/IV.
I am tired of cleaning the rear LCD so I made one for myself. I will use it for the time being until I find a good one.
I found somewhere a piece of foam rubber. I cut it to shape. Made a hole and glue everything together with double sided tape and crazy glue.
For this project, I have to tear apart an old Canon original eye cup and made it as the base for clicking onto the camera. I used another Canon eye cup fixing it to the other end. Do not use cheap eye cup for viewing. The rubber material is not reliable and may cause harm to your eye(s).
There is no correctional lens and thus no magnification. Tunnel effect is minimum. You may find a thinner foam rubber which will improve the tunnel effect further.
I painted the foam rubber black to avoid reflection.
Then the rest is cosmetic.