01-19-2019 05:06 AM
Hi,
Our EOS M recently started to have a blade shaped overexposure in every photo. What can cause this - is it a lens or a shutter fault in the camera? Is there any way to fix this by myself or will I need to send the camera to manufacturer (and probably cost of repair to exceed the camera value now )
01-19-2019 06:28 AM
Almost certainly a shutter fault, as you guessed probably an expensive repair so may be the time to start looking at new cameras.
01-20-2019 01:35 PM
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.