12-18-2012 01:32 AM
Hi! I am having problems with the flash on my EOS 40d. I get a message saying a incomp. flash or flash's power is turned off. I think this started after another photographer attached his external flash to my camera (no idea what flash he used). What can I do to fix this so I can get my internal flash to start working again?
Thanks!
12-18-2012 04:40 AM - last edited on 12-18-2012 09:28 AM by Crista
This advice might apply:
@bud411 wrote:
Had that happen to my T1i, turned out the micro switch in the rails on the hot shoe was stuck. After removing the metal plate & freeing it up with a small screwdriver, it's never done it again...
12-18-2012 09:25 AM
How exactly do I go about doing this? Thank you so much!
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.