10-03-2020 03:23 PM
I use an external monitor to film, but last time I plugged into the camera, I didn't get any signal. I have tried a different camera and the cable and monitor both work. Has anyone else had a problem with the HDMI port?
10-13-2020 12:10 PM
Do you have strain relief on the hdmi cable? According to LensRentals, many cameras just have the HDMI connectors held by solder to the board and are easily pulled loose with too much strain.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.