Canon Community Canon Community
 


Reply
New Contributor
Posts: 3
Registered: ‎05-30-2017

Canon 60d screen(flip) not working but LCD screen on the top is working...............

My canon 60d was working very well...but from yesterday there is an issue with this......

 

Its flip screen is not working but LCD is working...

 

and no photo can be taken......

 

there is no battery issue.....

Esteemed Contributor
Posts: 3,816
Registered: ‎06-11-2013

Re: Canon 60d screen(flip) not working but LCD screen on the top is working...............

The "info" button on the back of your camera controls what the LCD will display when using the camera.  

 

But the "info" button causes the camera to cycle between several optional displays... including the basic shooting info, the cameras's built-in digital "level", etc.  ONE of the optional modes is to simply keep the display switched off.  The display would still work if you used the "menu" button.

 

Does the display light up if you use either the "menu" button or the "info" button?

 

If not then there may be a worn wiring issue (since the display is hinged and swivels it can wear out).  The good news is it is serviceable if that's all it is.

 

 

Tim Campbell
5D III, 5D IV, 60Da
New Contributor
Posts: 3
Registered: ‎05-30-2017

Re: Canon 60d screen(flip) not working but LCD screen on the top is working...............

no.... its not responding........ simply the LCD is working well...........

 

Even nothing is showing in "viewfinder".........

Honored Contributor
Posts: 5,089
Registered: ‎06-25-2014

Re: Canon 60d screen(flip) not working but LCD screen on the top is working...............


@govindarthi wrote:

no.... its not responding........ simply the LCD is working well...........

 

Even nothing is showing in "viewfinder".........


And the removable eyepiece on the viewfinder is solidly in place and not pushed upwards a little?

Bob
Philadelphia, Pennsylvania USA
New Contributor
Posts: 3
Registered: ‎05-30-2017

Re: Canon 60d screen(flip) not working but LCD screen on the top is working...............

nope...........its properly placed.

Moderator
Posts: 1,442
Registered: ‎10-25-2012

Re: Canon 60d screen(flip) not working but LCD screen on the top is working...............

Hello govindarthi,

 

If the eyecup isn't blocking the IR sensor, the viewfinder is normal, and everything else seems fine, except the LCD screen isn't working, the next step is to send it in for repair.

 

If you're here in the USA, start the repair here on our site: http://Canon.us/xe47 

 

Outside of the USA, head HERE to select your region/country and you'll find further support options from there.

powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement