cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Canon 5D mark II image problem

00Pdr
Apprentice

Hi,

As you can see in the attachment, I'm getting this pretty weird "ghost" on my photos. Hope you can see it. It's in the corners,
Is it possible to confirm just with this picture, if a proper sensor cleaning in a professional store will fix this, or it could mean that the sensor needs to be replaced?
Thank you all for your help.mark II suja.jpg

Best regards,
Pedro P

1 ACCEPTED SOLUTION

Peter
Authority
Authority

Fungus on sensor. http://www.dpreview.com/forums/thread/3052342

 

"The fungus usually attaches itself to the underside of the low pass filter, and rarely on top where you might have a small chance of removing it. If you did remove it, it will leave a stain on the low pass filter, much like pulling a creeper off a wall.

Most cameras are not worth repairing due to the high cost of the sensor/low pass filter and the labor."

View solution in original post

2 REPLIES 2

jrhoffman75
Legend
Legend

Do you mean the vein-like artifacts in upper left and lower right?

 

If you take lens off and activate manula sensor clean do you see anything on the sensor?

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

Peter
Authority
Authority

Fungus on sensor. http://www.dpreview.com/forums/thread/3052342

 

"The fungus usually attaches itself to the underside of the low pass filter, and rarely on top where you might have a small chance of removing it. If you did remove it, it will leave a stain on the low pass filter, much like pulling a creeper off a wall.

Most cameras are not worth repairing due to the high cost of the sensor/low pass filter and the labor."

Announcements