Canon Community Canon Community
 


Reply
Highlighted
New Contributor
Posts: 3
Registered: ‎09-01-2014

Broken body MARK IV

Hello everybody! 

I am from Costa Rica and this is the first time that I post something here.

Yesterday I dropped my mark iv with the old version 600f/4 and thank God nothing happened to the lens but the camera shows a crack on the lower part and the small LCD, the battery is also broken but the camera seems to be working with no problem. We don't have a Canon repair shop in my country and I wondered if Canon can put a new alloy body and LCD on this camera?

 

MANY THANKS FOR YOUR REPLY!

 

JuanKgigo

 

Esteemed Contributor
Posts: 2,341
Registered: ‎11-14-2012

Re: Broken body MARK IV

If the LCD still works properly the crack may just be to the clear cover over it. That cover is easily replaced.
"A skill is developed through constant practice with a passion to improve, not bought."
New Contributor
Posts: 3
Registered: ‎09-01-2014

Re: Broken body MARK IV

[ Edited ]

Thanks cicopo.

 

The crack is visitble and the LCD is broken also, still working but broken and as it can be seen, the battery compartment is also twisted.

Esteemed Contributor
Posts: 2,341
Registered: ‎11-14-2012

Re: Broken body MARK IV

Agree with your assessment. Hopefully a Canon moderator can set you up with a service depot's address.

"A skill is developed through constant practice with a passion to improve, not bought."
New Contributor
Posts: 3
Registered: ‎09-01-2014

Re: Broken body MARK IV

Many thanks cicopo!

powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement