Canon Community Canon Community
 


Reply
Highlighted
Occasional Contributor
Posts: 5
Registered: ‎11-14-2020

40D Firmware Update 1.1.1

Hi there,

 

Apparently Canon has scrubbed firmware update files from their websites for products that are no longer supported.  

 

I am trying to find "eos40d111.exe"

does anyone here have it?

 

Thanks!

Highlighted
Reputable Contributor
Posts: 997
Registered: ‎11-14-2012

Re: 40D Firmware Update 1.1.1

You have PM.
DCS 3c, DCS 520, D30, D60, 1Ds, 300D, 30D, 1000D IR, 7D, 6D, 6D, M5
15-45/3.5-6.3 IS, 16-35/4 IS, 22/2, 24/1.4 II, 24-105/4 IS, 50/1.4, 50/1.2, 85/1.8, 100/2.8, 70-200/2.8 IS II, 300/2.8 IS
Highlighted
Reputable Contributor
Posts: 868
Registered: ‎12-24-2013

Re: 40D Firmware Update 1.1.1

I wouldn't try upgrading the firmware if your camera is not working properly. Firmware doesn't fix a broken camera, and if you try, you could make things worse. 


I would only do it as a last resort if I was prepared to junk the camera rather than fix it. 

Mike Sowsun
S110, SL1, 80D, 5D Mk III
Highlighted
VIP
Posts: 13,287
Registered: ‎12-07-2012

Re: 40D Firmware Update 1.1.1

" Firmware doesn't fix a broken camera,..."

 

I don't know why people see FW re-installation as a camera fix.  Most of the time people don't even know a camera has FW until somebody says so.  That person probably doesn't understand the purpose of upgrading FW. A lot of the time a new FW only adds a new language.  Something most of us don't need. Sometimes it adds a new lens but if you don't have that lens nor intend to buy one it also dosen't help you. You really need to read exactly what the updated FW does.

 

Like said, one thing it doesn't do is repair a broken camera. If you think that is the direction you need to go a total reset to factory default is the best option.

EB
EOS 1DX and 1D Mk IV and several lenses!
Highlighted
Occasional Contributor
Posts: 5
Registered: ‎11-14-2020

Re: 40D Firmware Update 1.1.1

A proper Firmware update can indeed fix a lot of issues for lots of different products that rely on computerized components, depending on what is in the update.  I couldn't tell you how many times I have resurrected a motherboard, laptop, docking station, (and even cameras) with the right firmware update. 

 

A total reset to factory default was the first thing I tried and this did not solve the issue I was having.  In my research, I have heard multiple mentions that the autofocus problem I am experiencing was fairly common and was hoping that the firmware updates that had been released after the camera launched may have addressed this issue.  The challenge was finding the actual update file because Canon in it's infinite wisdom decided that they would remove it from their website years after it was released becuase that model wasn't supported anymore.

 

Basically, what I have right now is a DSLR that works more like an old film camera in that I will have to always use manual focus, which isn't what I'm looking for in a DSLR.  I'm trying everything I can to fix this before investing in a new camera.

Highlighted
VIP
Posts: 13,287
Registered: ‎12-07-2012

Re: 40D Firmware Update 1.1.1

I pretty much disagree with your feelings but you need to do what you see as best.  Just make sure you read what the FW update does.  I guarantee it will not fix a broken camera. Plus if done incorrectly because the camera is faulty, the new FW can brick the camera. Then only Canon can revive it.

 

You are correct that some FW updates have bug swats in them. So if that is the problem you are having, all won't have the problem, you need the update.  And that is exactly what and why there is FW updates. Again, just make sure you read what the FW update does.  Because if your issue is not addressed in it, it won't fix your camera's problem.

EB
EOS 1DX and 1D Mk IV and several lenses!
Highlighted
Reputable Contributor
Posts: 868
Registered: ‎12-24-2013

Re: 40D Firmware Update 1.1.1

[ Edited ]

The 40D 1.1.1 firmware has nothing that will fix your AF problem. 

http://www.bobatkins.com/photography/digital/eos_40D_firmware_update_1-1-1.html

 

 

 

Firmware update Version 1.1.1 incorporates the following fixes and improvements.

  • Fixes a malfunction that in rare occurrence causes a low battery indication to be displayed when using the EF 85mm F1.2L II USM lens. Depending on the battery check timing of the camera, the battery level displayed on the camera's LCD data panel may shows Battery will be exhausted soon or Battery must be recharged, even though the battery capacity is sufficient.
  • Fixes a malfunction that in rare occurrence causes an Err 06 Self Cleaning Sensor malfunction to appear on the camera's LCD monitor and LCD data panel, even when the Self Cleaning Sensor Unit is operating normally. This message may appear depending on the timing of when the camera is switch to the ON position.
  • Fixes a malfunction that prevents correct colors from being printed when direct printing. RAW images captured using the camera's custom Picture Styles (Emerald, etc.), which have been downloaded from Canon's Web site and registered under User Def. 2 or User Def. 3.
  • Modifies the level of subject brightness that causes the AF-assist beam to fire when using an external Speedlite.
  • Enables an external flash connected to the camera's synchro terminal to fire even when the camera's built-in flash is popped up.
Mike Sowsun
S110, SL1, 80D, 5D Mk III
powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement