07-19-2014 09:02 PM
hi all , im new to this forum and unfortunatley my first post is a shout for help with my 1dx .
just today my beloved 1dx seems to have formed a problem with the exposure level indicator .
when i am shooting in jpeg and half press the shutter the display appears as normal but when i want to adjust the exposure the adjustable indicator dissapears on some of the settings for over exposed and underexposed but a couple more clicks and it reappears .
the display is worse when shooting in raw as the complete exposure level indicator disappears completly so i have no way of knowing if the exposure is correct .
has anyone had this problem , and is there a fix for it , i have tried rebooting the firmware update but the problems still remains .
im leaning towards it being a hardware problem , but with my limited technical knowledge this is really just a guess .
any help appreciated
thanks in advance
mark
07-20-2014 12:25 PM
A 1D x !?!
Send it to CPS. Don't mess with it.
07-20-2014 03:43 PM
thanks for the advice , much appreciated
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.