04-13-2014 01:03 AM
I just bought a Rebel T3i and it won't turn on out of the box. I've done everything exactly as the directions say, but each time I flip the "on" switch, nothing happens. I've managed to turn it on but ONLY by flipping the "on" switch, taking out the battery, putting it back in, then flipping the battery door closed (entire sequence with the "on" switch in place). So far, of all the things I've tried, this is the only thing that works. Has anyone else had the same thing happen or can help me figure out what might be wrong? I live in Africa and had the camera brought here with a friend, so unfortunately, just returning it isn't really an option at this point. Thanks!
04-13-2014 11:29 AM - edited 04-13-2014 11:30 AM
And you are certain the battery is charged before you try?
Otherwise, returning, or warranty service may be your only options.
04-13-2014 11:50 AM
Yes, 100% certain. I charged the battery over night and the green light was showing on the charger when I woke up. Thanks.
04-13-2014 12:25 PM
When you were finally able to get the camera to power up, did it prompt you to set the date & time?
I'm wondering if the camera was really "new".
04-20-2014 10:39 AM
Yep, sure did.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.