Canon Community Canon Community
 


Reply
Highlighted
New Contributor
Posts: 1
Registered: ‎02-12-2014

T2i has F00

How would I be able to fix this? I don't know how it happened!
Highlighted
Honored Contributor
Posts: 6,832
Registered: ‎11-13-2012

Re: T2i has F00

Your camera isn't recognizing a lens. Check that your lens is fully installed and/or check that contacts are clean.

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, MX472, LR Classic
Highlighted
VIP
Posts: 12,892
Registered: ‎12-07-2012

Re: T2i has F00

F00 usually means there's no contact with a lens or the lens has no built in chip. Is it a real Canon lens or an after market? This happens quite often with off-brand lenses.

Otherwise make sure the little spring loaded contacts are all "springing".  Smiley Happy

EOS 1DX and 1D Mk IV and several lenses!
Highlighted
Occasional Contributor
Posts: 21
Registered: ‎01-10-2014

Re: T2i has F00

There are still lenses on the market that are made for manual focus. If this lens is new to you that may be the case.

powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement