07-27-2014 01:44 AM - edited 07-27-2014 02:12 AM
When I turn on the camera the quick control screen comes on. How do I get the LCD screen to show what I am pointing the camera at? It may be the Shooting Settings Screen not the quick control screen.
Solved! Go to Solution.
07-27-2014 08:36 AM
2. Set the lens focus mode switch to <AF>.
3. Set the shooting mode to a Creative Zone mode. (Live View shooting cannot be used in Basic Zone modes.)
4. Press the < > (Live View shooting) button. The Live View image will appear on the LCD monitor.
5. The AF point < > will appear. You can press the <Cross Keys> to move the AF point to where you want to focus.
07-27-2014 08:36 AM
2. Set the lens focus mode switch to <AF>.
3. Set the shooting mode to a Creative Zone mode. (Live View shooting cannot be used in Basic Zone modes.)
4. Press the < > (Live View shooting) button. The Live View image will appear on the LCD monitor.
5. The AF point < > will appear. You can press the <Cross Keys> to move the AF point to where you want to focus.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.