10-16-2017 07:52 PM
10-17-2017 06:10 AM
If anyone is wondering, I got a different result using the same charger with a different battery
this time, with the new battery the 'charge' LED stayed solid and didn't blink at all. After two hours of charging, it was fully charged. My problem was certainly unique to the original battery I was using.
10-29-2017 06:04 PM
Hey. My Lc-e10 charger blinks about once or twice a second without the battery being inside. Any solutions?
That's not right. Buy a new one. Unplug that thing before it starts a fire, too.
10-30-2017 07:28 PM
Thanks for posting.
So we may better assist you, please let us know the camera model you're using. In addition, please let us know when you purchased it.
12-07-2017 10:38 AM
12-07-2017 04:45 PM
Bought a Rebel T6 in December 2016. Battery charger is an LC-E10 for battery LP-E10. Initially charged battery as required. Used the camera sporadically from January to August. Charged the battery 2-3 times during that period. Have not used camera until this week (December 1st). The battery has a very low charge as indicated in the display. The charger will not recognize the battery -- no lights come on. Have cleaned the contact terminals, no change. One would think the charger would last more than a handful of charges. Any suggestions other than buy a new charger? Thanks.
I'd be more inclined to suspect the battery of being the problem, rather than the charger. If you have only one of each, I'd suggest that you buy a new battery before before you consider buying a new charger. Ideally, you should have a spare of both; but a spare battery is more of a necessity, and a charger is less likely to fail.
When in last December did you buy the camera? Whichever device is failing may not be out of warranty.
12-08-2017 09:52 AM