08-01-2015 01:27 AM
Solved! Go to Solution.
08-01-2015 10:01 AM
@Triciaan wrote:
The image does not appear in the screen. Only the image setting information shows. How can I change it back to show the image? Thanks.
The 400D doesn't have a "live view" mode, so you can see only pictures that have already been taken. To activate that capability, push the small button with the blue arrow head on it. Then use the two buttons to the left and right of the "set" button to select which picture to view.
It sounds as though you don't have a user manual. You can download it from Canon's Web site. Since the 400D is no longer made, it won't be on the page with the current cameras. But poke around in the "support" area and you should be able to find it.
08-01-2015 10:01 AM
@Triciaan wrote:
The image does not appear in the screen. Only the image setting information shows. How can I change it back to show the image? Thanks.
The 400D doesn't have a "live view" mode, so you can see only pictures that have already been taken. To activate that capability, push the small button with the blue arrow head on it. Then use the two buttons to the left and right of the "set" button to select which picture to view.
It sounds as though you don't have a user manual. You can download it from Canon's Web site. Since the 400D is no longer made, it won't be on the page with the current cameras. But poke around in the "support" area and you should be able to find it.
08-01-2015 07:40 PM
08-01-2015 08:14 PM
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.