09-15-2013 04:39 PM
When I try to take a picture, it says: "Card cannot be accessed. Reinsert/change card or format card with camera."
So, I try to format the cards, and it says "Cannot format. Change card."
I have used both these cards before and never had a problem, this just happened all of the sudden.
I even tried re-formatting the cards on my computer, but no luck.
10-25-2015 09:20 PM - edited 10-25-2015 09:24 PM
Hi evanjamesmommy, I recommend contacting us for assistance. For contact options, please use this link: http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
I don't think I'd hold my breath waiting for "evanjamesmommy" to click the button. It's been more than two years since she posted to this thread.
02-14-2016 08:45 PM - edited 02-14-2016 09:20 PM
This seems to be a common problem with canon cameras. I have had my T4i for three years now and today is the first day it will no longer read memory cards. Have tried 3 different cards all have the same result they will not work in the camera.
09-25-2022 01:48 AM
It sure is a problem. Same thing happened to me, in about the same timeframe. No wonder it was a cheaper camera than its comparable competitors -- shoddy components. There is no way the card reader should fail so for so many people, without any damage or abuse to the camera whatsoever. More like a scamera.
09-25-2022 10:31 AM
You know that thread is 6 years old?
09-25-2022 12:48 PM
Of course I do, but the need to vent never grows old.
09-26-2022 09:51 AM
And, that the T4i has been out of production for 10 years?
10-11-2022 09:03 AM
Of course, but if the camera has had light use, it should still have the capability to read an so card. Your comments do little for the situation other than pointing out obvious, yet not insightful facts. Ever tried helping anyone here or do you just enjoy trolling too much?
10-11-2022 10:42 AM - edited 10-11-2022 10:43 AM
Facts, just the facts. The first comment was to hint a suggestion that you start your own new thread that is not 6 years old but apparently it fell on deaf ears. The second was to offer, repair by Canon is probably not going to happen on a 10 year old out of production Rebel.
"Ever tried helping anyone here or do you just enjoy trolling too much?"
I'll keep that in mind. 😉
10-11-2022 11:59 AM
If it was truly your intention to help with your original reply, simply add, "so you should probably start a new thread to get more replies" or words to that effect, not just state that the thread is 6 years old. Otherwise your comment could easily be taken as just mocking a lowly "Apprentice" who has not yet achieved the lofty status of "Legend".
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 188.8.131.52
PowerShot SX420 IS - Version 184.108.40.206
PowerShot 620 HS - Version 220.127.116.11
PowerShot SX720 HS - Version 18.104.22.168
PowerShot G1X Mark III - Version 22.214.171.124
PowerShot G7X Mark II - Version 126.96.36.199
PowerShot G9X Mark II - Version 188.8.131.52
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.