05-16-2016 05:57 PM - edited 05-16-2016 05:58 PM
I am not seeing a change in exposure in the viewfinder when I change expposure compensation or aperture setting on my 7Dmkii. I fear I may have hit a button accidently and can't figure it out... help!!!
05-16-2016 06:08 PM
05-16-2016 06:10 PM
Oh, okay. Thanks! I guess I was getting confused with my other cameras (that do show exposure change)
05-16-2016 06:29 PM
@barryshap wrote:Oh, okay. Thanks! I guess I was getting confused with my other cameras (that do show exposure change)
It could also be the lenses that you're using. A "preset" lens (which most SLR lenses are these days) won't stop down to the selected aperture until you click the shutter. This allows the viewfinder to maintain the full brightness of which the lens is capable. But on some older or cheaper lenses, the aperture will change as soon as it's set, so smaller apertures will make the scene look dimmer.
05-17-2016 06:38 AM
The camera should show you Exposure Simulation in Live View mode. Check the Camera[5] menu.
05-17-2016 10:07 AM
That is probably it, his other cameras don't have viewfinders.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.