cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

cannon rebel t7 no image and no auto focus

Rocks
Apprentice

auto focus on, quick mode.. Image in lcd has focus points showing, but there is no auto focus when shtter is pushed halfwauy. pushed all the way shutter works..  press review it says "no image".  worked fine the last time I used it. setting is on all auto. Also flash is supposed to be disabled but pops up when shtter is pushed. I am betting it is something simple cuase I am not that smart on this stuff.

4 REPLIES 4

jrhoffman75
Legend

@Rocks wrote:

auto focus on, quick mode.. Image in lcd has focus points showing, but there is no auto focus when shtter is pushed halfwauy. pushed all the way shutter works..  press review it says "no image".  worked fine the last time I used it. setting is on all auto. Also flash is supposed to be disabled but pops up when shtter is pushed. I am betting it is something simple cuase I am not that smart on this stuff.


First, go into the menu and reset all camera settings and all custom functions. Instructions for that will be in your manual.

 

THen set camera to P(rogram) mode on the dial and go outside in daylight and try to take a picture.

 

If that doesn't clear up the problem, a few suggestions:

 

1. is there a camera club near you. Often if you go to a meeting someone might be able to help you. I know my club does that.

 

2. is there a camera store near you

 

3. here is the website for Canon support: Canon U.S.A., Inc. | Service & Repair

 

4. Midwest Camera has been recommended by some folks on this forum

 

5. Cameraworks of Colorado Springs has been recommended by folks on the Ugly HedgeHog site

 

I have no direct experience with either of them.

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

Thanks for the info. I found some one theat knew the cmaera and he adjusted the Quick mode and it seems to be working.

 

Raymond224
Apprentice

skylightpaycard wrote:

auto focus on, quick mode.. Image in lcd has focus points showing, but there is no auto focus when shtter is pushed halfwauy. pushed all the way shutter works..  press review it says "no image".  worked fine the last time I used it. setting is on all auto. Also flash is supposed to be disabled but pops up when shtter is pushed. I am betting it is something simple cuase I am not that smart on this stuff.


 


@Raymond224 wrote:

skylightpaycard wrote:

auto focus on, quick mode.. Image in lcd has focus points showing, but there is no auto focus when shtter is pushed halfwauy. pushed all the way shutter works..  press review it says "no image".  worked fine the last time I used it. setting is on all auto. Also flash is supposed to be disabled but pops up when shtter is pushed. I am betting it is something simple cuase I am not that smart on this stuff.


 


Quick mode?  Are you using the OVF, the optical viewfinder?  Or, are using the Live View on the rear screen?

--------------------------------------------------------
"The right mouse button is your friend."
Announcements
03/14/2023: New firmware version 1.8.1 is available for EOS R6

03/02/2023: New Firmware Updates Are Available:

EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.