01-05-2014 11:23 AM
01-05-2014 11:32 AM - edited 01-05-2014 12:24 PM
No, that's not a problem or fault with the camera.
That's normal. It's a very short duration, partial power flash that the camera fires before the full power flash, to measure the distance to subject and amount of light needed by the flash when it fires. A "pre-flash", if you will.
***********
Alan Myers
San Jose, Calif., USA
"Walk softly and carry a big lens."
GEAR: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
FLICKR & PRINTROOM
01-05-2014 11:48 AM
01-05-2014 04:59 PM
If you press the depth of field preview button then the flash will flicker brightly for about a second. It is essentially pulsing the light very rapidly and it makes a buzzing sound. This can also happen when using the flash as a focus-assist light. This is normal and not a defect.
You can buy an external shoe-mounted flash such as the Canon Speedlite 430EX II. This speedlight fires a red pattern/beam (focus assist beam) which allows the camera to lock focus on your subject without needing a white light to focus.
10-26-2017 05:02 PM
But why does it "buzz" (it's like an electrical short buzzing sound and is most annoying)? So, although I understand that the flash goes off rapidly to assist with focus, I don't understand "why" it needs to make that audible noise - which is both distracting to the photographer and the subject(s), often invoking a look - or comment - such as, "What's wrong with your camera?"
10-26-2017 05:58 PM
@pcdarcan wrote:But why does it "buzz" (it's like an electrical short buzzing sound and is most annoying)? So, although I understand that the flash goes off rapidly to assist with focus, I don't understand "why" it needs to make that audible noise - which is both distracting to the photographer and the subject(s), often invoking a look - or comment - such as, "What's wrong with your camera?"
The buzzing happens because firing the flash at the required intensity calls for the application of a very high voltage. Inevitably, some of the necessary energy is released into the atmosphere and perceived as sound. Believe me when I tell you that Canon (or Nikon or Sony or any of the others) would prefer to use that energy to make the flash brighter or conserve it for later use. But unfortunately, the laws of physics are what they are, and none of those august institutions currently possess a way to override them.
10-26-2017 07:49 PM
@pcdarcan wrote:But why does it "buzz" (it's like an electrical short buzzing sound and is most annoying)? So, although I understand that the flash goes off rapidly to assist with focus, I don't understand "why" it needs to make that audible noise - which is both distracting to the photographer and the subject(s), often invoking a look - or comment - such as, "What's wrong with your camera?"
The flash of light is concentrated burst of energy. Much of the energy is in the from of light, but not all of it. A perfect conversions of electrical charge into photons doesn’t take place. Some of the charged particles are striking the inside of the flash tube, which creates the sound that you here.
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.