cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

RF100-500 mounted to R5 focus issues

Sadie1
Enthusiast
Hoping someone can advise me on an issue I’m experiencing with the RF 100-500.
If at 100mm it focuses quite quickly. If at 500mm I lose shots due to I have to manually focus it. It doesn’t matter if shooting a BIF with a blue sky or if shooting bird houses.
I’ve noticed using the RF800 - it obtains focus much quicker.
Lenses mounted to the R5
Thank You
11 REPLIES 11

Waddizzle
Legend

@Sadie1 wrote:
Hoping someone can advise me on an issue I’m experiencing with the RF 100-500.
If at 100mm it focuses quite quickly. If at 500mm I lose shots due to I have to manually focus it. It doesn’t matter if shooting a BIF with a blue sky or if shooting bird houses.
I’ve noticed using the RF800 - it obtains focus much quicker.
Lenses mounted to the R5
Thank You

How is the focus range switch on the lens set?  Do not expect the lens to switch from focusing at one end of the zoom range to the other automatically.  Under the right conditions, the lens can be so out-of-focus after zooming from one end of the range to the other, that the camera cannot understand what it sees.  All that it sees in one big blur.

--------------------------------------------------------
"The right mouse button is your friend."

Sadie1
Enthusiast
Hi - it is set on Full. I also checked the firmware updates on both camera and lens and they are up to date.


@Sadie1 wrote:
Hi - it is set on Full. I also checked the firmware updates on both camera and lens and they are up to date.

Judging from your video, you may get better AF performance on the other setting.  You're focused across a room.

 

2BEF2559-1391-40DC-B1E5-C4E1AE7F2A9E.jpeg

 

Have you changed any AF settings or shooting modes recently?  Again, the really wide primes are designed for accurate focusing because of the very narrow Dof, not focusing speed.

--------------------------------------------------------
"The right mouse button is your friend."

Sadie1
Enthusiast
I did not attach a video.


@Sadie1 wrote:
I did not attach a video.

Responder misspoke. It doesn't change the recommendation. Limiting the range for focusing will help by limiting the amount of searching the camera has to do.

 

Some lenses just seem to have more of a problem than others when they are severely out of focus.

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

Sadie1
Enthusiast
Hi John - yes I’m aware of that. I have it on Full. About the only time it is not on Full is when I’m shooting BIF.
Since posting - I contacted Canon and they recommended sending the R5 in for repair. They are thinking it’s the camera - not the lens. If after repair the issue still exists - they recommend I send the lens in for repair. For the last week I’ve been using the 100-500 on the R6 and it’s been working fine.
Thank You

Hi Sadie - just a thought. To minimize your down time why not just send both to Canon at the same time.

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

Sadie1
Enthusiast
Hi John - that was my original intent. The Canon rep talked me into just sending the R5. Which I accepted because I wanted to use the 100-500 on the R6 this past week on a boat tour.

I'm curious to know is there was any resolution in this? Did canon find any issues with either camera or lens?

Announcements
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!