01-05-2020 10:34 PM - edited 01-05-2020 11:43 PM
Hello I recently puchased a opteka zoom lens and it says to enable no lens reconition setting on the camera but i cant find it. I have a Cannon EOS m50 and have set it to all modes but it wont take a photo. on the camera it shows what i want to take the photo (moon) of in focus and everything but when i go take photo nothing happens. when i do remote shutter from my phone it says shutter unavaliable. Please help! Thanks in advance!
Solved! Go to Solution.
01-06-2020 04:33 PM - edited 01-06-2020 04:34 PM
I found it it is in custom functions pg 3 under the third page on the menu. Thank y'all all for helping me!
01-06-2020 12:12 AM
You are telling on yourself. You have not gone through all of the menus or the instruction manual. There is menu setting that enables the camera to release the shutter without a lens.
01-06-2020 09:15 AM
Though you might need to download the advanced manual instead of any manual that came with the camera.
01-06-2020 11:10 AM
"There is menu setting that enables the camera to release the shutter without a lens."
This is correct and it should be right under the first one or two menu screens. I don't have a M50 so I don't know for positive but its there somewhere. It is the second menu on my 1 series.
01-06-2020 12:01 PM
They might have to be in an "advanced mode" too, like PAS or M.
01-06-2020 04:33 PM - edited 01-06-2020 04:34 PM
I found it it is in custom functions pg 3 under the third page on the menu. Thank y'all all for helping me!
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.