02-20-2017 07:26 AM
Hello,
My camera, canon eos 70D, a while back started behaving a bit wierd by lagging very much when i want to use it after keeping it without using it for a while. when i turn to the video mode or live view the screen beocme very laggy. its simply unusable, but after a while it responded very good and I was able to use it.
I use my 70D mainly for video shooting on events and weddings.
recentely when I put battery and switched it on, I wanted to take some photos then I realized that when I take photo and I want to preview I don't see the picture but the white screen with some strips. So I copied the pictures and analyse then on computer only to find that the actual pictures are white with some strips.
Here are the pictures:
I tried reseting the camera to the factory settings, nothing changed. I even updated the firmware from 1.1.1 to 1.1.2 still nothing happens.
Please I would like to hear from you if there is something I can do to fix this.
Thanks.
02-20-2017 08:59 AM
Ew, not good. If a new memory card that has been low level formatted in the camera doesn't fix it, your camera needs repairs.
02-20-2017 12:15 PM
This phenomenon happen even if there is no memory card at all.
The lag and the preview image with white and strips happens regardless of low level formart. All my memory cards are class 10 with read speed not minimum than 60mbps
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.