cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Minimum shutter speed setting - Aperture priority on EOS R6

sanathsp
Apprentice

Hey everyone,

I've been using the Canon EOS R6, and I primarily shoot in aperture priority mode. I have a question regarding the minimum shutter speed setting. I want my minimum shutter speed to not go below 1/250 when I'm shooting in aperture priority mode. However, I've noticed that when I set the minimum shutter speed to 1/250, it applies to all camera modes (M, P, A, S).

Is there any way to set the minimum shutter speed only for aperture priority mode? I've looked through the settings, but haven't found a way to do this yet. It's important for me because I want to maintain a certain level of sharpness in my images, especially in fast-paced situations.

Any advice or workaround would be greatly appreciated!

Thanks in advance!

1 ACCEPTED SOLUTION

Accepted Solutions

p4pictures
Elite
Elite

There are a few settings that will help, but ultimately the choice as to the most suitable for you is yours.

Option 1

For Av and P modes you can set a minimum shutter speed that applies when you are shooting with AUTO ISO. Conventionally when auto ISO is used, the camera tries to maintain a shutter speed using the reciprocal of the focal length as the minimum shutter speed. So a 50mm lens results in 1/50th as the min shutter speed with the camera increasing the ISO to allow that with the chosen aperture value in Av mode. You will find this setting in the ISO speed settings that allows you to set a specific minimum shutter speed regardless of the lens focal length. Screenshots added below.

2403-CUSA-forum 1.jpg2403-CUSA-forum 2.jpg2403-CUSA-forum 3.jpg

Option 2

If you want to make sure that the minimum setting of 1/250th is applied for both manual ISO and auto ISO then you will need to use the shutter speed limits, and a custom shooting mode. Set the camera mode dial to Av, then go to the setup menu and register a custom shooting mode, eg C1. Then make sure that the auto updates are enabled, so that when you make a change to the saved settings while the mode dial is set to C1 it will update the stored settings.

2403-CUSA-forum 4.jpg2403-CUSA-forum 5.jpg2403-CUSA-forum 6.jpg2403-CUSA-forum 7.jpg

Turn the mode dial to C1, then go to the custom functions menu and setup the shutter speed so the min speed is 1/250th. Now C1 is a clone of the "normal" Av mode, but with a hard limit of shutter speed at 1/250th. Other modes and regular Av on the mode dial do not have the limit.

2403-CUSA-forum 8.jpg2403-CUSA-forum 9.jpg

 


Brian
EOS specialist trainer, photographer and author
-- Note: my spell checker is set for EN-GB, not EN-US --

View solution in original post

8 REPLIES 8

Waddizzle
Legend
Legend

There should be two minimum settings.  One for you, and one for the camera.

--------------------------------------------------------
"Enjoying photography since 1972."

p4pictures
Elite
Elite

There are a few settings that will help, but ultimately the choice as to the most suitable for you is yours.

Option 1

For Av and P modes you can set a minimum shutter speed that applies when you are shooting with AUTO ISO. Conventionally when auto ISO is used, the camera tries to maintain a shutter speed using the reciprocal of the focal length as the minimum shutter speed. So a 50mm lens results in 1/50th as the min shutter speed with the camera increasing the ISO to allow that with the chosen aperture value in Av mode. You will find this setting in the ISO speed settings that allows you to set a specific minimum shutter speed regardless of the lens focal length. Screenshots added below.

2403-CUSA-forum 1.jpg2403-CUSA-forum 2.jpg2403-CUSA-forum 3.jpg

Option 2

If you want to make sure that the minimum setting of 1/250th is applied for both manual ISO and auto ISO then you will need to use the shutter speed limits, and a custom shooting mode. Set the camera mode dial to Av, then go to the setup menu and register a custom shooting mode, eg C1. Then make sure that the auto updates are enabled, so that when you make a change to the saved settings while the mode dial is set to C1 it will update the stored settings.

2403-CUSA-forum 4.jpg2403-CUSA-forum 5.jpg2403-CUSA-forum 6.jpg2403-CUSA-forum 7.jpg

Turn the mode dial to C1, then go to the custom functions menu and setup the shutter speed so the min speed is 1/250th. Now C1 is a clone of the "normal" Av mode, but with a hard limit of shutter speed at 1/250th. Other modes and regular Av on the mode dial do not have the limit.

2403-CUSA-forum 8.jpg2403-CUSA-forum 9.jpg

 


Brian
EOS specialist trainer, photographer and author
-- Note: my spell checker is set for EN-GB, not EN-US --

sanathsp
Apprentice

thank you @p4pictures so much for this crucial information 

Good afternoon.

Is there any way to set the minimum shutter speed to 1/50?
I wanted this function to use, in the video in aperture mode.

Thanks

You can't use aperture priority in video mode on the EOS R6, since when you turn the mode dial to video the only choices are full automatic exposure or manual exposure. If you are shooting still images in Av mode and then press the movie record button the camera will start recording a movie with full automatic exposure and this cannot be changed.

If the camera you have is EOS R6 Mark II, then when movie mode is selected the setting for minimum shutter speed for auto ISO is no longer available. If you are shooting still images in Av mode, and then press the movie record button the camera switches to full automatic exposure movie and starts recording. 


Brian
EOS specialist trainer, photographer and author
-- Note: my spell checker is set for EN-GB, not EN-US --

Hi, I updated firmware from 1.5.0 to 1.6.0 on the R6 M2 and in MANUAL MODE I cannot:

1. lower my shutter speed below 1/50 (1/10, 1"....) 

2. any change to values is from 1/50 to 1/50.1-1/50.2-1/50.3 and so on.

I checked all settings but cannot figure out.  I even switched off the Anti-flickering but no change at all. 

Any suggestion?

Thanks  

Make sure you turn off HF anti-flicker shooting on the 3rd red menu, note this is different to Anti-flicker shooting that is just above it on the same menu. 

If you check this part of the manual you will find the notice about the shutter speed restrictions

https://cam.start.canon/en/C012/manual/html/UG-04_Shooting-1_0160.html

You will need to expand the caution note under the 5th step Take the picture

Screenshot 2025-08-15 at 10.54.56.jpg


Brian
EOS specialist trainer, photographer and author
-- Note: my spell checker is set for EN-GB, not EN-US --

massi
Apprentice

THANKS SOOOOOO MUCH!!!

Holiday
Announcements
12/15/2025: New firmware update available for EOS C50 - Version 1.0.1.1

11/20/2025: New firmware updates are available.

EOS R6 Mark III - Version 1.0.1

EOS R3 - Version 2.0.0

EOS R1 - Version 1.2.0

EOS R5 Mark II - Version 1.2.0

EOS R5 - Version 2.2.1

PowerShot G7 X Mark III - Version 1.4.0

PowerShot SX740 HS - Version 1.0.2


10/21/2025: Service Notice: To Users of the Compact Digital Camera PowerShot V1

10/15/2025: New firmware updates are available.

Speedlite EL-5 - Version 1.2.0

Speedlite EL-1 - Version 1.1.0

Speedlite Transmitter ST-E10 - Version 1.2.0


07/28/2025: Notice of Free Repair Service for the Mirrorless Camera EOS R50 (Black)

07/24/2025: New firmware updates are available.


07/23/2025: New firmware updates are available.

EOS R5C - Version 1.1.1.1

EOS C80 - Version 1.0.3.1


7/17/2025: New firmware updates are available.

EOS R7 - Version 1.7.1

EOS R10 - Version 1.7.0

EOS R8 - Version 1.5.0

EOS R50 - Version 1.4.0

Powershot V10 - Version 1.4.0

Powershot V1 - Version 1.1.0

EOS R50V - Version 1.1.1


05/21/2025: New firmware update available for EOS C500 Mark II - Version 1.1.5.1

02/20/2025: New firmware updates are available.

RF70-200mm F2.8 L IS USM Z - Version 1.0.6

RF24-105mm F2.8 L IS USM Z - Version 1.0.9

RF100-300mm F2.8 L IS USM - Version 1.0.8

RF50mm F1.4 L VCM - Version 1.0.2

RF24mm F1.4 L VCM - Version 1.0.3


01/22/2024: Canon Supports Disaster Relief Efforts in California
01/14/2025: Steps to resolve still image problem when using certain SanDisk SD cards with the Canon EOS R5 Mark II