I have a Canon t5i Rebel. Out of the blue, the screen stopped displaying my pictures after I took

[jojotj11]

I have a Canon Rebel t5i.  Out of the blue, the screen stopped displaying my pictures after I took a picture.  When I press the menu button, the screen works fine, as well as when I press the play button, but it used to show the pictures as soon as I snapped one.  I have checked the settings and Image review is set to 4 seconds.  I am not sure how to fix this problem.  Can anyone help me? 

[Waddizzle]

Try resetting the camera.  If you are correct about the playback delay, try changing it, too.

[jojotj11]

Thank you so much for your reply! I am fairly new to this camera. I am not sure how to reset the camera. Also, I have changed the playback delay to off, didn't work, then I changed it to 2 seconds, 4 seconds... So on. Nothing has made a difference. I just like seeing the picture I take right after I take it.

[Waddizzle]

---

@jojotj11 wrote:
Thank you so much for your reply! I am fairly new to this camera. I am not sure how to reset the camera. Also, I have changed the playback delay to off, didn't work, then I changed it to 2 seconds, 4 seconds... So on. Nothing has made a difference. I just like seeing the picture I take right after I take it.

---

Do not press any buttons after you take a picture, and the image should appear.  You can clear the camera in the menus.

IF you do not have a copy of the instruction manual, then you can download it at the following link.  Enter your model number.

https://www.usa.canon.com/internet/portal/us/home/support

[Waddizzle]

BTW, are you using the LCD screen to take pictures, Live View mode?  If so, your images will not appear after you take them.

[jojotj11]

Once again, thank you so much! I do not use the LCD screen when I'm taking pictures, I just like to see them after I take each picture. I do have the manual, in fact, I just looked it all up. I'll try resetting the camera and see if that works! I'll let you know! Thanks again!

[fatcat]

which button are you using to review your shot right after you take it?  Also, what kind of sd card are you using?  (the micro w/ adapter don't work) In your manual it will tell you which ones work best.  When all else fails, reset!  lol  I am new too, and I have found the best way to learn is to get thru the hurdles, but keep going.  Try not to get overwhelmed.  One bite at a time, pretty soon you have eaten an elephant.  Everyone on this site is so helpful when you get stuck or need some advice.  Just a word, stick to photography issues or they will censor every word.  So did you figure out what was wrong or get it fixed at least?

[jojotj11]

I don't have the camera on me right now, but it's the same card I've always had,. I take the pictures then download them on my computer and delete them on the card. I used to not have to push a button to view the pictures. Before, I could take a picture then it would pop up on the LCD screen. Now for some reason, I have to hit the play or review bottom to see them, it's not automatic. (Like I'm used to.) I'll do the reset, but I'm still reviewing my manual before I do it though so I know exactly what it resets. Thank you for the reply! If I can't figure it out, I'm going to take it back to Best Buy where I got it and ask them. The man that sold it to me has been really helpful with showing me different things on this camera.

[kvbarkley]

On my T6S, after you hit the menu button, it is in the first "camera" menu under "Image Review". You can set it to off, or some number of seconds and "hold".

[jojotj11]

I have it set on 4 seconds and turned on. Like I said, it had always shown me the picture most recently taken until this past weekend and I haven't changed any of my settings.