06-26-2016 01:14 PM
The LCD panel indicates all is well (including the battery), I aim the camera and press halfway to focus and everything still seems to be fine, then when I press down the rest of the way to take the picture nothing happens. A look back at the LCD screen shows an empty battery (which flashes a few times) with nothing else on the screen. I have changed batteries and still get the same result.
06-27-2016 09:18 AM
Are the batteries making good contact? Is there anything on the contacts?
06-27-2016 07:49 PM
I have cleaned inside the battery compartment with a q-tip.
06-28-2016 05:33 AM
@traceydavidb wrote:I have cleaned inside the battery compartment with a q-tip.
Bad move. You do not want use something that can scratch, or leave residue behind, in this case lint and cotton fibers.
06-28-2016 05:40 AM
Thanks for the tip - will try something else!
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.