06-26-2016 01:14 PM
The LCD panel indicates all is well (including the battery), I aim the camera and press halfway to focus and everything still seems to be fine, then when I press down the rest of the way to take the picture nothing happens. A look back at the LCD screen shows an empty battery (which flashes a few times) with nothing else on the screen. I have changed batteries and still get the same result.
06-27-2016 09:18 AM
Are the batteries making good contact? Is there anything on the contacts?
06-27-2016 07:49 PM
I have cleaned inside the battery compartment with a q-tip.
06-28-2016 05:33 AM
@traceydavidb wrote:I have cleaned inside the battery compartment with a q-tip.
Bad move. You do not want use something that can scratch, or leave residue behind, in this case lint and cotton fibers.
06-28-2016 05:40 AM
Thanks for the tip - will try something else!
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
09/26/2023: New firmware updates are available.
CN-E45-135mm T 2.4 L F - Version 1.4.0
EOS 1DX Mark III - Version 1.8.0
08/18/2023: Canon EOS R5 C training series is released.
07/31/2023: New firmware updates are available.
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
PowerShot Elph 360HS - Version 1.1.0.0
PowerShot SX420 IS - Version 1.1.0.0
PowerShot 620 HS - Version 1.1.0.0
PowerShot SX720 HS - Version 1.1.0.0
PowerShot G1X Mark III - Version 1.1.0.0
PowerShot G7X Mark II - Version 1.2.0.0
PowerShot G9X Mark II - Version 1.1.0.0
03/30/2023: New firmware updates are available.
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.