04-14-2020 11:59 PM
Read a lot of forums and watched a lot of videos and I think I figured it out!
I open EOS Utility, plug my M50 into my iMac with a micro USB (one made for data transfer, such as a phone cable), then open live view mode and move it into a different window by itself.
Next, I open OBS and add a window capture and select the live view window. I crop it and I am good to go!
Note: You have to make sure the M50 screen is out and flipped into selfie mode, this is what keeps the camera from freezing after 30 minutes.
Now you have a streaming camera with continuous autofocus for longer than 30 minutes, oh and without a capture card!
I hope this is able to help someone that ran into the same issues as me!
04-23-2020 06:54 AM
@Waddizzle wrote:"A question you should ask at ML forum and not ask Canon nor me. I loose some dynamic range at this temperature. I have 11,47 EV of dynamic range at 56 degrees Celsius.
Here some temperatures in video mode at 29,97 frames/second. 10 minutes between every photo. Still no temperature warning from Canon."
I will let you ask the question in a ML forum. I will pass. You must have me mixed up with those who have argued that DSLRs can overheat when used as video cameras.
I simply asked a simple question. If there is no problem with rising temperatures, then why is the temperature display seemingly highlighted as a warning? I think it is orange because the displayed temperature is far outside of the manufacturer recommended areas of safe operation.
Or you just ask at ML forum why they use orange at 50 degrees Celsius for 7D, instead of guessing.
04-23-2020 07:00 AM
@Peter wrote:
@Waddizzle wrote:"A question you should ask at ML forum and not ask Canon nor me. I loose some dynamic range at this temperature. I have 11,47 EV of dynamic range at 56 degrees Celsius.
Here some temperatures in video mode at 29,97 frames/second. 10 minutes between every photo. Still no temperature warning from Canon."
I will let you ask the question in a ML forum. I will pass. You must have me mixed up with those who have argued that DSLRs can overheat when used as video cameras.
I simply asked a simple question. If there is no problem with rising temperatures, then why is the temperature display seemingly highlighted as a warning? I think it is orange because the displayed temperature is far outside of the manufacturer recommended areas of safe operation.
Or you just ask at ML forum why they use orange at 50 degrees Celsius for 7D, instead of guessing.
I have already said that I will pass. I asked you what does it mean? It is YOUR camera. YOU explain it.
04-23-2020 10:01 AM
04-23-2020 10:27 AM
@Peter wrote:
40 minutes of raw video. Reformatted the card four times. Reached 58 degrees Celsius. Seems hard to reach the internal heat warning indicator if the ambient temperature is around 24 degrees Celsius.
I suggest you combine forces with several other posters and establish your own laboratory, as the hardware limits of photographic gear is your primary interest. You can conduct various stress tests and other arcane measurements on camera bodies so that people whose interest in photography is mostly limited to the range of stress on comonents, chips, screens and buttons have a source of reliable info. There are engineering enthusiasts whose photographic interests don't include photography beyond the hardware side of things. For example, many people seem only interested in the number of times the shutter button has been pressed or how much heat a chip can take before failing. That's where you fit in. Best of luck.
04-23-2020 10:37 AM - edited 04-23-2020 10:37 AM
@John_SD wrote:
@Peter wrote:
40 minutes of raw video. Reformatted the card four times. Reached 58 degrees Celsius. Seems hard to reach the internal heat warning indicator if the ambient temperature is around 24 degrees Celsius.I suggest you combine forces with several other posters and establish your own laboratory, as the hardware limits of photographic gear is your primary interest. You can conduct various stress tests and other arcane measurements on camera bodies so that people whose interest in photography is mostly limited to the range of stress on comonents, chips, screens and buttons have a source of reliable info. There are engineering enthusiasts whose photographic interests don't include photography beyond the hardware side of things. For example, many people seem only interested in the number of times the shutter button has been pressed or how much heat a chip can take before failing. That's where you fit in. Best of luck.
You could just have sent me a PM instead
Have a nice life.
04-23-2020 10:54 AM
@Waddizzle is it bad to think anything in your opinion? Better just pretend that you know it, like you do?
I "think" because I've seen this on a Sony camera once, and never on a Canon. On the Sony it's a warning and then a shutdown. Makes sense?
04-23-2020 10:59 AM - edited 04-23-2020 11:04 AM
@docusync wrote:@Waddizzle is it bad to think anything in your opinion? Better just pretend that you know it, like you do?
I "think" because I've seen this on a Sony camera once, and never on a Canon. On the Sony it's a warning and then a shutdown. Makes sense?
There is a warning and if you continue past that the camera will turn off Live view/video. From Canon and about 5D III:
Q4. Can my camera be damaged if I continue shooting while the high internal temperature warning indicator is displayed?
A4. No, the camera will not be damaged.
04-23-2020 11:04 AM
04-23-2020 11:08 AM
@Peter, thank you, this is really good to know!
I shoot with a Ninja V on the EOS R, and maybe because the encoding is done on an external device I really never saw any kind of warning. The longest video I've shot was about 1.5 hours.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.