04-28-2016 05:33 PM
I recorded live piano recently (on my Canon SL1), and thought that the notes in the lower ranges did not sound deep enough. I realize thta the mike is not supposed to be great in any camera. In fact, one of the reasons I bought it was becaue I saw that it had a mike input for a better mike. Before I invest in another mike, I would like to see the frequency spectrum of the built in mike. DOes anyone know that? FOr instance, I can purchae a Rode mike with a freq response from 40 hz to 20 khz.. I want to make sure the included mike is not as good as this. I don't really care about the fact that the Rode has better directionality.
Thanks.
LNovik
04-29-2016 09:36 AM
I cannot find the frequency response of any of the on-camera microphones documented anywhere.
However, I would be less concerned abou tthe frequency response of the microphone than I would concerned about the frequency response of the audio portion of a video signal. Many professional videographers do not rely on the camera to record audio for them. Instead, they rely on external audio recording, and use a slate to synchronize audio with the video during playback and editting.
04-29-2016 01:44 PM
AK4646 audio IC (on 550D, 50D, 60D, 5Dm2)
AK4636 audio IC (500d only)
AK4950 (650D).
Start checking them. Should give you something.
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.