cancel
Showing results for 
Search instead for 
Did you mean: 

Error 30 code

CameraFan
Contributor

Any suggestions that don't require sending it out for repair?

I've looked pretty much everywhere about this problem and wish I'd read the Amazon reviews before making the purchase.  Apparently the error 30 is more common than I could have imagined.

 

4 REPLIES 4

CameraFan
Contributor

It's a t3 1100d model.

Mykolas
Authority

Hi CameraFan!

 

Thank you for posting.

 

"Err 30" indicates that malfunctions related to the power source have been detected.

 

  1.  Turn off the camera.

  2.  Remove the battery from the camera.

  3.  Using a microfiber cloth, thoroughly clean the contacts on the battery.  Do this even if the contacts already look clean.

  4.  Retry the battery in the camera.

 

If the error still occurs, please try an alternate battery.  If the alternate battery produces the same results, your camera will require service to correct the issue.

 

To start the repair process, you'll need to complete a Repair Request on our website.

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I'll try that today, thank you for your suggestion. 

creek55
Apprentice

I have started my err 30 investigation using  this forum and want to share my experience. I have solved the problem.

Camera: Rebel T3i, 3 years old 12, 050 clicks

Got camera wet ( salt water ) but never submerged. Sure enough - err 30...

Tried everything - nothing worked. Call Cannon, $190 + shipping. If they can fix it, of course.

Worst case scenario - wasted money on shipping, 3 weeks later I am in square one.

Timing was not in my favor so I went to a couple local shops. First shop told me camera is beyond repair, rusty and economically unfeasible to fix. The second shop when heard about water damage flatly refused even to look

They also told me canon people will not touch it as well if water is involved.

OK, new camera body or new camera then

I was repairing TV, VCR etc when I was a kid. Not like I can fix the camera with all these micros and potentially damaged shutter box. But it was worth to try. Less then hour later I got camera working again. Not sure how long it will last, nevertheless:

 

1. remove the cover, it is easy, you can follow this:           

                          http://www.lifepixel.com/tutorials/infrared-diy-tutorials/canon-t3i

2. use magnifying glass and inspect the whole board, especially connectors. I noticed traces of salt and corrosion

3. I have used alcohol, piece of cloth, sharp metal object ( needle would do it ) and cleaned up the surface

4. Inserted battery and voila, camera works again

5. Final inspection, dried the board and put camera together

 

24 hours later camera work OK, no err 30 whatsoever. No grantee it will not appear again ( salted water is nasty )

I'll make an update if I see err 30 again

 

I hope this comment can help somebody

Cheers

creek55

 

Announcements

08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/30/2022: Service Notice: EOS 70D: Error 70 or Error 80
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x