10-14-2024 02:21 PM - last edited on 10-15-2024 09:35 AM by Danny
EOS CANON 250D, My camera is now 4 month old in use but lately I have been having an issue when i put in my card on my camera it may hold for a while then later after some few pictures it says card cannot be accessed and to make it worse it says error.
10-14-2024 02:24 PM
Hi and welcome to the forum:
Is your card a full-size card or micro-SD with adapter?
What size and brand/model is it please?
10-14-2024 02:31 PM
Have you formatted it in the camera lately?
I suggest you try a new full size card.
10-14-2024 05:56 PM
I would also like to add what size card are you using. For some reason entry level cameras such as yours don't play nicely with SDXC (64GB) or larger SD Cards. Stick with 32GB (SDHC) or smaller SD Cards. Also avoid using Micro SD Cards in an adapter this causes problems as my colleague Trevor pointed out. If Canon designed the camera use it. It would take them directly without an adapter.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.