08-10-2017 01:54 PM - edited 08-10-2017 02:08 PM
Hello my frends,
I have EOS 1000D and big problem with DSLR.
Cant boot on power on. When I put fully charged battery, close batt. door, RED LED blink fast 1-2 sec and thats all. LCD display is black and stay black. When I press shutter to half or full, I can see tru viewfinder buSY message , ISO change value on light and thats all. When I put LOCKED SD Card, tru viewfinder I can see Err. , when I put unlocked SD Card ..still buSY. Shutter have no responde
USB to PC = not detected!
11-16-2018 04:48 AM
Hi,
My business bought a large number of these cameras recently. They were sold to us as fully refurbished but most of them have the "Busy" problem. I believe that installing the Canon service firmware ( EOS1000D_RXS106SC.FIR) will fix the problem. Do any of you know where I can get hold of a copy of such firmware?
Many thanks.
11-16-2018 07:56 AM
@GreenGoddess wrote:Hi,
My business bought a large number of these cameras recently. They were sold to us as fully refurbished but most of them have the "Busy" problem. I believe that installing the Canon service firmware ( EOS1000D_RXS106SC.FIR) will fix the problem. Do any of you know where I can get hold of a copy of such firmware?
Many thanks.
I believe you should get a refund. The 1000D was introduced a decade ago, and has not been serviced by Canon for a few years due to lack of parts availability that are/were made by other manufacturers.
In other words, I think that it is highly unlikely that the cameras were refurbished by Canon, if at all. You have been sold cameras that are mostly unserviceable. If they are inoperative, then they will most likely stay that way.
BTW, Canon firmware downloads are available on the Canon Support web site. I think your best move is to get a refund.
11-16-2018 08:01 AM
08-13-2020 03:59 PM
Please help to find this EOS1000D_RXS106SC.FIR firmware file!
Thanks!
08-14-2020 03:51 AM
Send me your email via PM
08-14-2020 05:17 AM
Thank You!
11-25-2022 06:19 AM
Hello everyone.
I know this topic is old but I need help.
I have a canon with the same problem.
Could someone help me find the firmware EOS1000D_RXS106SC.FIR, to see if I can recover the camera.
thank you from Portugal.
11-25-2022 06:50 AM
Hi
I have the firmware if you want it. I tried it but it didn't cure the problem. I have sent you a DM.
11-25-2022 07:07 AM
Hello thank you so much.
07/31/2023: New firmware updates are available.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 1.1.0.0
PowerShot SX420 IS - Version 1.1.0.0
PowerShot 620 HS - Version 1.1.0.0
PowerShot SX720 HS - Version 1.1.0.0
PowerShot G1X Mark III - Version 1.1.0.0
PowerShot G7X Mark II - Version 1.2.0.0
PowerShot G9X Mark II - Version 1.1.0.0
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!
EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STMCanon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.