09-16-2017 12:39 AM
Hi,
I recently got new lens for my old Rebel T1i. The previous one is a 18-55mm, the new is a 70-300mm. The new lens is great and works perfect. But my old one started to "misbehave" after switching back to it. It won't focus right away, and sometimes not even shoot! I'd have to zoom in/out until getting to work again. It sounds like it has to "readjust" back to the camera. Am I doing anything wrong with the switching? I'm very carefull there's no dust around while I do that, so I have no idea of what/why is happening. I'd appreciate any help someone can offer. Thanks!
09-16-2017 01:30 PM - edited 09-18-2017 07:50 PM
If the lens is old, then it could be jealous of the new lens.
Switching lenses should not affect the lens performance. Just make sure to power the camera down when you change lenses. I know how hard it can be to remember to power down the camera to change lenses, because most of the time I am in a hurry when I do it.
Not powering down the camera to change lenses is a recommended best practice. Not doing seems to harm nothing, but Canon would not make the recommendation without good reason. It gives your older camera [a chance] to "reboot" itself, too, [with the new lens installed].
09-16-2017 02:04 PM
"If the lens is old, then it could be jealous of the new lens"
I had that thought too, lol
I always have the power down...
09-16-2017 01:48 PM
@Crica wrote:Hi,
I recently got new lens for my old Rebel T1i. The previous one is a 18-55mm, the new is a 70-300mm. The new lens is great and works perfect. But my old one started to "misbehave" after switching back to it. It won't focus right away, and sometimes not even shoot! I'd have to zoom in/out until getting to work again. It sounds like it has to "readjust" back to the camera. Am I doing anything wrong with the switching? I'm very carefull there's no dust around while I do that, so I have no idea of what/why is happening. I'd appreciate any help someone can offer. Thanks!
Misbehaving? This kind of behavior can only be attributed to a poor upbringing. However, the lens sounds too old to expect much in terms of "readjustment," so it may be time to cut it loose and adopt a new and better behaved lens.
09-16-2017 02:08 PM
09-18-2017 10:56 AM
I had a problem like this, and started to make sure that the camera was off before changing lenses. It seemed to happen when I left the camera on.
09-18-2017 01:02 PM
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.