03-18-2015 06:20 PM
I'd like to use a Canon EOS lens with an astronomical CCD camera to do some non-astronomical imaging. This project requires the ability to change the lens aperture to deepen the field of view. I've heard that the aperture can be set by connecting to an EOS body, hitting the DOF preview button, and detaching while keeping that button held down. But we won't necessarily have an EOS body available while doing this testing. I was wondering if there was any adapter that has the electronic inputs to control the aperture, of if such information is out there (like format of the necessary electrical signal, pinout info, etc.) so that we could build our own controller.
03-19-2015 05:45 PM - edited 03-19-2015 05:46 PM
Yes, there is but it will cost you about $400-$500. http://www.bhphotovideo.com/c/product/829759-REG/Redrock_Micro_8_090_0001_Live_Lens_MFT_Active.html
More info in these links:
03-19-2015 06:19 PM
You need to get a hold of Tim Campbell on this forum. He knows everything about how to do astro stuff with a Canon.
BTW, it would not be my first choice to try the solution you described on a EOS body. I doubt it will work and may harm both!
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.