07-24-2017 12:16 PM
Have a canon 70-200 f2.8 non IS lens that is having AF issues. My other zoom lens (24-70 f2.8) is not having any issues paired with my 5D Mk III body, so pretty sure it is an issue with the 70-200. The problem is with the AF on closer subjects (approx. within 25 ft) - on more distant subjects, the AF is tack sharp, but when I try to focus on a closer subject, the AF won't lock. The motor continues to hunt for proper focus. Tried cleaning the contacts, but still have the problem. Anyone else have experience with this issue. Thought I would ask you experts before shipping the lens off for repairs.
07-25-2017 03:52 PM
It sounds like your lens needs service.
If you focus the lens manually, is the focus able to move freely from closest focus to infinity?
Note that "L" series lenses with USM focus have a clutch which allows the focus mechanism to slip against the rotation of the focus ring on the lens barrel. So you'd probably want to look through the lens or watch the focus distance scale in the window move as you rotate the focus ring.
You're looking to see if it has the full range of focus range without sticking or jamming.
07-25-2017 07:39 PM
Two questions:
!. Are you able to focus the lens manually at those ranges?
2. If you have a filter on your lens, remove it. That's one less question mark in the problem.
07-25-2017 09:03 PM
In reply to the last couple of posts (the lens is enroute to the repair facility so there isn't any new troubleshooting I can do):
- I didn't use the "Restore to Factory Settings" option, however I went methodically through every AF option in the camera menu and either changed or disabled the function to see if it had an effect.
- I was able to manually focus on subjects (even those within the 25 ft range), but I did not test the entire range of the manual focusing ring to see if there was any binding, etc.
- I have a standard UV filter on the lens that I never removed. The UV filter, however, looked clean and undamaged to the naked eye.
Thanks to all that are contributing to this discussion. You are a wealth of knowledge and information.
07-27-2017 02:48 PM
Update: Notification from Canon repair facility: "The USM in not functioning properly and needs replacement."
Parts, labor, and shipping: $361.11
07-27-2017 03:18 PM
@mish757 wrote:Update: Notification from Canon repair facility: "The USM in not functioning properly and needs replacement."
Parts, labor, and shipping: $361.11
Thanks for the update.
Well worth the repair, even in KEH's 'bargan' condition the lens sells for 3 times that.
07-25-2017 10:09 AM
Still think it might be the camera.
Whenever a camera seems to be doing something strange (or not doing what it should) it's worth a try to use the 'restore all settings to factory' option. The lens doesn't know when it is in focus. The camera does. You may have a C.Function set incorrectly.
Besides that it could be you. The scene you are trying to shoot. No contrast, too dark, too close, etc, for instance.
07-25-2017 12:30 PM
@ebiggs1 wrote:Still think it might be the camera.
Whenever a camera seems to be doing something strange (or not doing what it should) it's worth a try to use the 'restore all settings to factory' option. The lens doesn't know when it is in focus. The camera does. You may have a C.Function set incorrectly.
Besides that it could be you. The scene you are trying to shoot. No contrast, too dark, too close, etc, for instance.
And I still think it might be cured with AFMA (assuming that the camera isn't a Rebel). The nice thing about AFMA is that it doesn't matter whether the problem is in the camera or the lens. It treats the symptom, not the disease.
07-25-2017 12:55 PM
Except the problem is not that the focus is off, it just can't focus, it hunts.
It looks to me that for some reason there is a lot of play in the AF connection to the focusing elements at 25 ft distances.
07-25-2017 01:07 PM
You guys have way more knowledge about this stuff than I do. What is AFMA? And when you say "a lot of play in the AF connection to the focusing elements", is that something in the lens itself? Moot points since the lens is in the mail to the Canon repair facility...just curious.
07-25-2017 01:18 PM
@mish757 wrote:You guys have way more knowledge about this stuff than I do. What is AFMA? And when you say "a lot of play in the AF connection to the focusing elements", is that something in the lens itself? Moot points since the lens is in the mail to the Canon repair facility...just curious.
AFMA is used when a lens is focusing, but, either front or back focusing instead of accurately focusing. Since your lens was having difficulty focusing at all, I doubt AFMA would have fixed your issue.
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.