cancel
Showing results for 
Search instead for 
Did you mean: 

my i70 was printing fine but making chugging noise. It squealed, stopped, yello blinks 3X

glenna
Apprentice
 
3 REPLIES 3

RCoppernoll
Apprentice
Check that the ink tanks are not jamming against the left side of the printer. When I used too much hot glue to seal the tanks they jammed and gave a chunking noise as they tried to pass to the left under an overhang.

Thank you.  I'll see.  Actually, they seem to be stuck on the rt. side, not moving even when open

Ramona
Authority

Hello glenna,

 

Since the print head is over to the far right and will not move, please turn off the printer, unplug the power cord from the back, and leave it out for at least 10 minutes.  While the printer is off, please check inside of the paper feed areas and inside of the printer with a flashlight or other bright light to ensure that there are no obstructions in the printer.  Once this has been verified, please plug the printer back in and turn it back on.  If the ink tanks still do not move over, the printer will  unfortunately require servicing to resolve the problem.  Please click on the Contact Us link below to obtain your servicing options.

 

This didn't answer your question or issue? Find more help at Contact Us.

 

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Announcements
06/30/2022: Service Notice: EOS 70D: Error 70 or Error 80
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
03/22/2022: New firmware version 1.2.0 is available for PowerShot PICK
03/16/2022: New firmware version 1.5.2 is available for EOS-R5
03/16/2022: New firmware version 1.5.2 is available for EOS-R6
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.1.1 is available for EOS-R3
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x
12/7/2021: New firmware version 1.1.1 is available for CR-N 300
12/7/2021: New firmware version 1.1.1 is available for CR-N 500
12/2/2021: New firmware version 1.1.0 is available for RF 70-200 F4 L IS USM